'

Tablet PC Configuration

From linuxwacom
Jump to: navigation, search

This page is for Brand & model specific configuration issues & tips.

The linuxwacom project welcomes additions to its mediawiki so please join in if you have contributions.

Currently xf86-input-wacom does not have a configuration gui like linuxwacom's Wacom Control Panel (wacomcpl). However since wacomcpl stored its settings as a xsetwacom script in .xinitrc we can at least duplicate the .xinitrc, calling it say .xsetwacom.sh. Below is a set of sample scripts for various tablet pc's. These are a temporary hack while we wait on a replacement for wacomcpl, see Graphical Configuration Tools.

If yours is not among them noticed there is a high degree of overlap. They're all Wacom tablet pc's after all. So it should be relatively straight forward to assemble one for your tablet pc. While doing things this way may seem a little strange at first you'll find yourself quickly adapting. And this allows you some of the finer control over your tablet's features wacomcpl gave you.

Note While these xsetwacom commands were working as of 2-1-11 be aware that the xsetwacom interface may change without notice. If this happens feel free to update and correct this LWP mediawiki page.

If a xsetwacom command stops working your friend is the get command.

Contents


The usual invocation to get a parameter is:

 xsetwacom get "Wacom Intuos4 6x9 stylus" Button 1

Replace the device name with the one applicable in your case. This will print the current value of the parameter, in this case the current mapping for button 1.

 xsetwacom set "Wacom Intuos4 6x9 stylus" Button 1 3

sets the button 1 to logical button 3 - a right click. Note that parameters are per-tool and you will need to set the parameter for each tool if you want them to apply tablet-wide.


Finally, to get a list of parameters just type

 xsetwacom list parameters

Warning: With the advent of xf86-input-wacom-10.11 many of the xsetwacom parameter names have changed. See Table of New Parameter Names

Installing the Script

While you can change your settings on the fly using xsetwacom commands in a terminal they only apply during the current session. So you need to set it up to auto-start. Create a file and copy & paste the contents of the script you want into it. Rename it .xsetwacom.sh (or whatever you want) and place it in your home directory. Remember it will be a hidden file because of the . in front. To enable the xsetwacom commands in the .xsetwacom.sh file to apply to Xserver through a reboot you enter in a terminal.

chmod +x ~/.xsetwacom.sh

Or you could right click on the file and in Properties, in the Permission tab, check Execute as program. Then go to System->Preferences->Startup Applications (or your distributions equivalent) and click on Add and for the command write "sh /home/yourusername/.xsetwacom.sh" (without the quotes).

Once the script is executable you can double click on it to apply it's settings or reboot to check the auto-start set up.

The Sample Xsetwacom Scripts

Warning: These scripts below have not been reviewed by our developers and should be used with care

This section requires additional work. Please help to address the issues below:

  • They need to be reviewed by the developers to fix up the coding
  • And why can't we make those values defaults upstream?

The following scripts were authored by Favux. Where co-developed with others they are cited in the relevant script. All or almost all of the values are the defaults with the default stated and the appropriate range given. The scripts are intended to provide you with a framework to configure your settings in a text file rather than at the command line, with similar results to what the wacomcpl gui would have produced.

In the example scripts below both "device name" and ID # are used. Be sure to check for yours using 'xinput list' (without the quotes) in a terminal and use them. When you use a xorg.conf the "device names" will be stylus, eraser, touch, and pad. If you are hot plugging other devices into your tablet pc be sure to use "device name" as the ID # can change.

Serial Tablet PCs

Fujitsu T4210

## Device names and ID numbers from 'xinput list' entered in a terminal.
#
## In the example both "Device name" and ID # are used.  Note if you use the
## xorg.conf the "Device names" will be stylus, eraser, touch.
#
## If you are hot plugging use "Device name" as ID # can change.
#
## ClickForce changes name to Threshold with xf86-input-wacom 0.10.9 (11-19-10)
#
## Warning:  Changing Mode to either Absolute or Relative in stylus/eraser stops
## the mouse from being able to pull guidelines out of the ruler in Gimp.

## stylus = ID 10 = "Serial Wacom Tablet stylus"
xsetwacom set "Serial Wacom Tablet stylus" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Serial Wacom Tablet stylus" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Serial Wacom Tablet stylus" ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "Serial Wacom Tablet stylus" Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "Serial Wacom Tablet stylus" PressCurve "5 10 90 95"  # Bezier curve, default 0 0 100 100
xsetwacom set "Serial Wacom Tablet stylus" TPCButton "on"  # side switch+tip; off=side switch only or "hover"
xsetwacom set "Serial Wacom Tablet stylus" Mode "Absolute"  # or Relative cursor movement
xsetwacom set "Serial Wacom Tablet stylus" Button1 "1"  # left mouse click
xsetwacom set "Serial Wacom Tablet stylus" Button2 "3"  # right mouse click
xsetwacom set "Serial Wacom Tablet stylus" Button3 "2"  # middle mouse click
# sample T4210 coordinates
#xsetwacom set 10 topx "0"
#xsetwacom set 10 topy "0"
#xsetwacom set 10 bottomx "24576"
#xsetwacom set 10 bottomy "18432"
# or
#xsetwacom set 10 topx "78"
#xsetwacom set 10 topy "-56"
#xsetwacom set 10 bottomx "24517"
#xsetwacom set 10 bottomy "18070"

## eraser = ID 9 = "Serial Wacom Tablet eraser"
xsetwacom set "Serial Wacom Tablet eraser" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Serial Wacom Tablet eraser" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Serial Wacom Tablet eraser" ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "Serial Wacom Tablet eraser" Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "Serial Wacom Tablet eraser" PressCurve "0 10 90 100"  # default 0 0 100 100
xsetwacom set "Serial Wacom Tablet eraser" Mode "Absolute"  # or Relative cursor movement
xsetwacom set "Serial Wacom Tablet eraser" Button1 "1"
#xsetwacom set 9 topx "0"
#xsetwacom set 9 topy "0"
#xsetwacom set 9 bottomx "24576"
#xsetwacom set 9 bottomy "18432"

Lenovo ThinkPad X61t

## Device names and ID numbers from 'xinput list' entered in a terminal.
#
## In the example both "Device name" and ID # are used.  Note if you use the
## xorg.conf the "Device names" will be stylus, eraser, touch.
#
## If you are hot plugging use "Device name" as ID # can change.
#
## ClickForce changes name to Threshold with xf86-input-wacom 0.10.9 (11-19-10)
#
## Warning:  Changing Mode to either Absolute or Relative in stylus/eraser stops
## the mouse from being able to pull guidelines out of the ruler in Gimp.

## stylus = ID 14 = "Serial Wacom Tablet stylus"
xsetwacom set "Serial Wacom Tablet stylus" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Serial Wacom Tablet stylus" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Serial Wacom Tablet stylus" ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "Serial Wacom Tablet stylus" Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "Serial Wacom Tablet stylus" PressCurve "5 10 90 95" # Bezier curve, default is 0,0,100,100
xsetwacom set "Serial Wacom Tablet stylus" TPCButton "on"  # stylus tip + button, or "off" for hover mode
xsetwacom set "Serial Wacom Tablet stylus" Mode "Absolute"  # or Relative cursor movement
xsetwacom set "Serial Wacom Tablet stylus" Button1 "1"  # left mouse click
xsetwacom set "Serial Wacom Tablet stylus" Button2 "3"  # right mouse click
xsetwacom set "Serial Wacom Tablet stylus" Button3 "3"
# default X61t coordinates (from /var/log/Xorg.0.log)
#xsetwacom set "Serial Wacom Tablet stylus" topx "0"
#xsetwacom set "Serial Wacom Tablet stylus" topy "0"
#xsetwacom set "Serial Wacom Tablet stylus" bottomx "24576"
#xsetwacom set "Serial Wacom Tablet stylus" bottomy "18432"

## eraser = ID 13 = "Serial Wacom Tablet eraser"
xsetwacom set "Serial Wacom Tablet eraser" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Serial Wacom Tablet eraser" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Serial Wacom Tablet eraser" ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "Serial Wacom Tablet eraser" ClickForce "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "Serial Wacom Tablet eraser" PressCurve "0 10 90 100" # default is 0,0,100,100
xsetwacom set "Serial Wacom Tablet eraser" Mode "Absolute"  # or Relative cursor movement
xsetwacom set "Serial Wacom Tablet eraser" Button1 "1"
# coordinates are the same as used for the stylus
#xsetwacom set "Serial Wacom Tablet eraser" topy "0"
#xsetwacom set "Serial Wacom Tablet eraser" topx "0"
#xsetwacom set "Serial Wacom Tablet eraser" bottomy "24576"
#xsetwacom set "Serial Wacom Tablet eraser" bottomx "18432"

## Remove comments if your X61t has touch
## touch = ID 15 = "Serial Wacom Tablet touch"
#xsetwacom set "Serial Wacom Tablet touch" Touch "on" # default,  or "off"
#xsetwacom set "Serial Wacom Tablet touch" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
#xsetwacom set "Serial Wacom Tablet touch" RawSample "2"  # data pt.s filtered, default is 2, 0-100
#xsetwacom set 15 ClickForce "27"  # pressure, default is 27, range is 0-2047
##xsetwacom set 15 Threshold "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set 15 Mode "Absolute"  # or Relative cursor movement
#xsetwacom set 15 TapTime "250"  # default is 250 ms
#xsetwacom set 15 Button1 "1"
# sample X61t coordinates
#xsetwacom set 13 topx "?"
#xsetwacom set 13 topy "?"
#xsetwacom set 13 bottomx "?"
#xsetwacom set 13 bottomy "?"

## Developed with MES5464 @ Ubuntu forums

Lenovo ThinkPad's X200t & X201t

## Device names and ID numbers from 'xinput list' entered in a terminal.
#
## In the example both "Device name" and ID # are used.  Note if you use the
## xorg.conf the "Device names" will be stylus, eraser, touch.
#
## If you are hot plugging use "Device name" as ID # can change.
#
## ClickForce changes name to Threshold with xf86-input-wacom 0.10.9 (11-19-10)
#
## Warning:  Changing Mode to either Absolute or Relative in stylus/eraser stops
## the mouse from being able to pull guidelines out of the ruler in Gimp.

## stylus = "Serial Wacom Tablet stylus" = ID 15
xsetwacom set "Serial Wacom Tablet stylus" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Serial Wacom Tablet stylus" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Serial Wacom Tablet stylus" ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "Serial Wacom Tablet stylus" Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "Serial Wacom Tablet stylus" PressCurve "5 10 90 95" # Bezier curve, default is 0,0,100,100
xsetwacom set "Serial Wacom Tablet stylus" TPCButton "on  # or is Relative needed for gestures?"  # stylus tip + button, or "off" for hover mode
xsetwacom set "Serial Wacom Tablet stylus" Mode "Absolute"  # or Relative cursor movement
xsetwacom set "Serial Wacom Tablet stylus" Button1 "1"  # left mouse click
xsetwacom set "Serial Wacom Tablet stylus" Button2 "3"  # right mouse click
xsetwacom set "Serial Wacom Tablet stylus" Button3 "2"  # middle mouse click
# sample X200t coordinates, default coordinates in /var/log/Xorg.0.log
#xsetwacom set "Serial Wacom Tablet stylus" topx "0"
#xsetwacom set "Serial Wacom Tablet stylus" topy "0"
#xsetwacom set "Serial Wacom Tablet stylus" bottomx "26312"
#xsetwacom set "Serial Wacom Tablet stylus" bottomy "16520"

## eraser = "Serial Wacom Tablet eraser" = ID 13
xsetwacom set "Serial Wacom Tablet eraser" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Serial Wacom Tablet eraser" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Serial Wacom Tablet eraser" ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "Serial Wacom Tablet eraser" Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "Serial Wacom Tablet eraser" PressCurve "0 10 90 100" # Bezier curve, default is 0,0,100,100
xsetwacom set "Serial Wacom Tablet eraser" Mode "Absolute"  # or Relative cursor movement
xsetwacom set "Serial Wacom Tablet eraser" Button1 "1"
# coordinates are the same as used for the stylus
#xsetwacom set "Serial Wacom Tablet stylus" topx "0"
#xsetwacom set "Serial Wacom Tablet stylus" topy "0"
#xsetwacom set "Serial Wacom Tablet stylus" bottomx "26312"
#xsetwacom set "Serial Wacom Tablet stylus" bottomy "16520"

## depending on your model use the applicable following touch section ##

## single finger touch
## touch = "Serial Wacom Tablet touch" = ID 14
#xsetwacom set "Serial Wacom Tablet touch" Touch "on" # default,  or "off"
#xsetwacom set "Serial Wacom Tablet touch" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
#xsetwacom set "Serial Wacom Tablet touch" RawSample "2"  # data pt.s filtered, default is 2, 0-100
#xsetwacom set "Serial Wacom Tablet touch" ClickForce  # pressure, default is 27, range is 0-2047
##xsetwacom set "Serial Wacom Tablet touch" Threshold "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "Serial Wacom Tablet touch" Mode "Absolute"  # or Relative cursor movement
#xsetwacom set "Serial Wacom Tablet touch" TapTime "250"  # default is 250 ms
#xsetwacom set "Serial Wacom Tablet touch" Button1 "1"
# sample X200t coordinates
#xsetwacom set "Serial Wacom Tablet touch" topx "48"
#xsetwacom set "Serial Wacom Tablet touch" topy "90"
#xsetwacom set "Serial Wacom Tablet touch" bottomx "915"
#xsetwacom set "Serial Wacom Tablet touch" bottomy "940"

## two finger (2FG) or multitouch
## touch = "Serial Wacom Tablet touch" = ID 14
xsetwacom set "Serial Wacom Tablet touch" Touch "on" # default,  or "off"
xsetwacom set "Serial Wacom Tablet touch" Gesture "on"  # or "off"
xsetwacom set "Serial Wacom Tablet touch" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Serial Wacom Tablet touch" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Serial Wacom Tablet touch" ClickForce  # pressure, default is 27, range is 0-2047
#xsetwacom set "Serial Wacom Tablet touch" Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "Serial Wacom Tablet touch" Mode "Absolute"  # or Relative cursor movement; is Relative needed for gestures? 
xsetwacom set "Serial Wacom Tablet touch" TapTime "250"  # default is 250 ms
xsetwacom set "Serial Wacom Tablet touch" Button1 "1"  #  needed for 2FG touch?
# 1FG dbl. tap is left click, 2FG dbl. tap is right click
xsetwacom set 14 ZoomDistance "50"  # default is 50
xsetwacom set 14 ScrollDistance "20"  # default is 20
xsetwacom set 14 TapTime "250"  # 2FG R click, default is 250 ms
# sample X200t coordinates
#xsetwacom set "Serial Wacom Tablet touch" topx "?"
#xsetwacom set "Serial Wacom Tablet touch" topy "?"
#xsetwacom set "Serial Wacom Tablet touch" bottomx "?"
#xsetwacom set "Serial Wacom Tablet touch" bottomy "?"

## Developed with vfrjim @ Ubuntu forums

Toshiba Portege 3500

## Device names and ID numbers from 'xinput list' entered in a terminal.
#
## In the example both "Device name" and ID # are used.  Note if you use the
## xorg.conf the "Device names" will be stylus, eraser, touch.
#
## If you are hot plugging use "Device name" as ID # can change.
#
## ClickForce changes name to Threshold with xf86-input-wacom 0.10.9 (11-19-10)
#
## Warning:  Changing Mode to either Absolute or Relative in stylus/eraser stops
## the mouse from being able to pull guidelines out of the ruler in Gimp.

## stylus = ID 2 = "Wacom Serial Tablet PC Pen Tablet/Digitizer"
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" PressCurve "5 10 90 95" # Bezier curve, default is 0,0,100,100
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" TPCButton "on"  # stylus tip + button, or "off" for hover mode
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" Mode "Absolute"  # or Relative cursor movement
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" Button1 "1"  # left mouse click
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" Button2 "3"  # right mouse click
# default 3500 coordinates (from /var/log/Xorg.0.log)
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" topx "0"
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" topy "0"
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" bottomx "24576"
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer" bottomy "18432"

## eraser = ID 3 = "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser"
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" PressCurve "0 10 90 100" # Bezier curve, default is 0,0,100,100
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" Mode "Absolute"  # or Relative cursor movement
xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" Button1 "1"
# coordinates are the same as used for the stylus
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" topx "0"
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" topy "0"
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" bottomx "24576"
#xsetwacom set "Wacom Serial Tablet PC Pen Tablet/Digitizer eraser" bottomy "18432"

## Developed with Toxicstupidity @ Ubuntu forums

Toshiba Portege's M700 & M750

## Device names and ID numbers from 'xinput list' entered in a terminal.
#
## In the example both "Device name" and ID # are used.  Note if you use the
## xorg.conf the "Device names" will be stylus, eraser, touch.
#
## If you are hot plugging use "Device name" as ID # can change.
#
## ClickForce changes name to Threshold with xf86-input-wacom 0.10.9 (11-19-10)
#
## Warning:  Changing Mode to either Absolute or Relative in stylus/eraser stops
## the mouse from being able to pull guidelines out of the ruler in Gimp.

## stylus = ID 14 = "Serial Wacom Tablet stylus"
xsetwacom set "Serial Wacom Tablet stylus" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Serial Wacom Tablet stylus" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Serial Wacom Tablet stylus" ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "Serial Wacom Tablet stylus" Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "Serial Wacom Tablet stylus" PressCurve "5 10 90 95" # Bezier curve, default is 0,0,100,100
xsetwacom set "Serial Wacom Tablet stylus" TPCButton "on"  # stylus tip + button, or "off" for hover mode
xsetwacom set 14 Mode "Absolute"  # or Relative cursor movement
xsetwacom set 14 Button1 "1"  # left mouse click
xsetwacom set 14 Button2 "3"  # right mouse click
xsetwacom set 14 Button3 "2"  # middle mouse click
# sample M700 coordinates
#xsetwacom set 14 topx "155"
#xsetwacom set 14 topy "61"
#xsetwacom set 14 bottomx "26252"
#xsetwacom set 14 bottomy "16421"
# default M750 coordinates (from /var/log/Xorg.0.log)
#xsetwacom set 14 topx "0"
#xsetwacom set 14 topy "0"
#xsetwacom set 14 bottomx "26112"
#xsetwacom set 14 bottomy "16320"

## eraser = ID 12 = "Serial Wacom Tablet eraser"
xsetwacom set 12 Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set 12 RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set 12 ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set 12 Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set 12 PressCurve "0 10 90 100" # Bezier curve, default is 0,0,100,100
xsetwacom set 12 Mode "Absolute"  # or Relative cursor movement
xsetwacom set 12 Button1 "1"
# coordinates are the same as used for the stylus
#xsetwacom set 12 topx "155"
#xsetwacom set 12 topy "61"
#xsetwacom set 12 bottomx "26252"
#xsetwacom set 12 bottomy "16421"

## touch = ID 13 = "Serial Wacom Tablet touch"
xsetwacom set "Serial Wacom Tablet touch" Touch "on" # default,  or "off"
xsetwacom set "Serial Wacom Tablet touch" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Serial Wacom Tablet touch" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Serial Wacom Tablet touch" ClickForce  # default is 27, range is 0-2047
#xsetwacom set 13 Threshold  # default is 27, range is 0-2047
xsetwacom set 13 Mode "Absolute"  # or Relative cursor movement
xsetwacom set 13 TapTime "250"  # default is 250 ms
xsetwacom set 13 Button1 "1"
# default M750 coordinates
#xsetwacom set 13 topx "0"
#xsetwacom set 13 topy "0"
#xsetwacom set 13 bottomx "4096"
#xsetwacom set 13 bottomy "4096"

## Developed with BackBONE7 (M700) & WG- (M750) @ Ubuntu forums


USB Tablet PCs

HP Pavilion TX2000 & TX2500

## Device names and ID numbers from 'xinput list' entered in a terminal.
#
## In the example both "Device name" and ID # are used.  Note if you use the
## xorg.conf the "Device names" will be stylus, eraser, touch.
#
## If you are hot plugging use "Device name" as ID # can change.
#
## ClickForce changes name to Threshold with xf86-input-wacom 0.10.9 (11-19-10)
#
## Warning:  Changing Mode to either Absolute or Relative in stylus/eraser stops
## the mouse from being able to pull guidelines out of the ruler in Gimp.

## stylus = ID 12 = "Wacom ISDv4 93 Pen"
xsetwacom set "Wacom ISDv4 93 Pen" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Wacom ISDv4 93 Pen" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "Wacom ISDv4 93 Pen" ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "Wacom ISDv4 93 Pen" Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "Wacom ISDv4 93 Pen" PressCurve "5 10 90 95" # Bezier curve, default is 0,0,100,100
xsetwacom set 12 TPCButton "on"  # stylus tip + button, or "off" for hover mode
xsetwacom set 12 Mode "Absolute"  # or Relative cursor movement
xsetwacom set 12 Button1 "1"  # left mouse click
xsetwacom set 12 Button2 "3"  # right mouse click
xsetwacom set 12 Button3 "2"  # middle mouse click
# sample TX2000 coordinates, default coordinates in /var/log/Xorg.0.log
#xsetwacom set 12 topx "66"
#xsetwacom set 12 topy "-101"
#xsetwacom set 12 bottomx "26416"
#xsetwacom set 12 bottomy "16630"
# sample TX2500 coordinates
#xsetwacom set 12 topx "47"
#xsetwacom set 12 topy "22"
#xsetwacom set 12 bottomx "26416"
#xsetwacom set 12 bottomy "16514"

## eraser = ID 11 = "Wacom ISDv4 93 Pen eraser"
xsetwacom set 11 Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set 11 RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set 11 ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set 11 Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set 11 PressCurve "0 10 90 100" # Bezier curve, default is 0,0,100,100
xsetwacom set 11 Mode "Absolute"  # or Relative cursor movement
xsetwacom set 11 Button1 "1"
# coordinates are the same as used for the stylus
#xsetwacom set 11 topx "66"
#xsetwacom set 11 topy "-101"
#xsetwacom set 11 bottomx "26416"
#xsetwacom set 11 bottomy "16630"

## touch = ID 13 = "Wacom ISDv4 93 Finger"
xsetwacom set "Wacom ISDv4 93 Finger" Touch "on" # default,  or "off"
xsetwacom set "Wacom ISDv4 93 Finger" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "Wacom ISDv4 93 Finger" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set 13 ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set 13 Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set 13 Mode "Absolute"  # or Relative cursor movement
xsetwacom set 13 TapTime "250"  # default is 250 ms
xsetwacom set 13 Button1 "1"
# sample TX2000 coordinates
#xsetwacom set 13 topx "140"
#xsetwacom set 13 topy "215"
#xsetwacom set 13 bottomx "4028"
#xsetwacom set 13 bottomy "3969"
# sample TX2500 coordinates
#xsetwacom set 13 topx "174"
#xsetwacom set 13 topy "201"
#xsetwacom set 13 bottomx "3981"
#xsetwacom set 13 bottomy "3898"

## Developed with daulpavis (TX2000) & martinjochimsen (TX2500) @ Ubuntu forums

N-Trig: HP Touchsmart TX2z & Dell Latitude XT & XT2

## Device names and ID numbers from 'xinput list' entered in a terminal.
#
## In the example both "Device name" and ID # are used.
#
## If you are hot plugging use "Device name" as ID # can change.
#
## ClickForce changes name to Threshold with xf86-input-wacom 0.10.9 (11-19-10)
#
## Warning:  Changing Mode to either Absolute or Relative in stops the
## mouse from being able to pull guidelines out of the ruler in Gimp.

## stylus = ID 13 = "N-Trig Pen stylus"
xsetwacom set "N-Trig Pen stylus" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
xsetwacom set "N-Trig Pen stylus" RawSample "2"  # data pt.s filtered, default is 2, 0-100
xsetwacom set "N-Trig Pen stylus" ClickForce "27"  # pressure, default is 27, range is 0-2047
#xsetwacom set "N-Trig Pen stylus" Threshold "27"  # pressure, default is 27, range is 0-2047
xsetwacom set "N-Trig Pen stylus" PressCurve "5 10 90 95" # Bezier curve, default is 0,0,100,100
xsetwacom set "N-Trig Pen stylus" TPCButton "on"  # stylus tip + button, or "off" for hover mode
xsetwacom set "N-Trig Pen stylus" Mode "Absolute"  # or Relative cursor movement
xsetwacom set "N-Trig Pen stylus" Button1 "1"  # left mouse click
xsetwacom set "N-Trig Pen stylus" Button2 "3"  # right mouse click
xsetwacom set "N-Trig Pen stylus" Button3 "2"  # middle mouse click; Button3 only on Dell's, supposed to be eraser?
#xsetwacom set 13 topy "0"
#xsetwacom set 13 topx "0"
#xsetwacom set 13 bottomy "7200"
#xsetwacom set 13 bottomx "9600"

## use only one of the following touch sections if setting touch up on the Wacom driver ##

## For single finger set up.
## touch = ID 14 = "N-Trig Touchscreen touch"
#xsetwacom set 14 Touch "on" # default
#xsetwacom set 14 Suppress "4"  # data pt.s trimmed, default is 4, 0-20
#xsetwacom set 14 RawSample "2"  # data pt.s filtered, default is 2, 0-100
#xsetwacom set 14 ClickForce "27"  # default is 27, range is 0-2047
##xsetwacom set 14 Threshold "27"  # default is 27, range is 0-2047
#xsetwacom set 14 Mode "Absolute"  # or Relative cursor movement
#xsetwacom set 14 TapTime "250"  # default is 250 ms
#xsetwacom set "N-Trig Touchscreen touch" Mode "Absolute"  # or Relative cursor movement
#xsetwacom set "N-Trig Touchscreen touch" Button1 "1"
#xsetwacom set "N-Trig Touchscreen touch" topy "0"
#xsetwacom set "N-Trig Touchscreen touch" topx "0"
#xsetwacom set "N-Trig Touchscreen touch" bottomy "7200"
#xsetwacom set "N-Trig Touchscreen touch" bottomx "9600"

## For multitouch/2 finger gestures set up.
## touch = ID ?? = "N-Trig MultiTouch"
#xsetwacom set "N-Trig MultiTouch touch" Touch "on"  # or "off"
#xsetwacom set "N-Trig MultiTouch touch" Gesture "on"  # or "off"
#xsetwacom set "N-Trig MultiTouch touch" Suppress "4"  # data pt.s trimmed, default is 4, 0-20
#xsetwacom set "N-Trig MultiTouch touch" ClickForce  # default is 27, range is 0-2047
##xsetwacom set "N-Trig MultiTouch touch" Threshold "27"  # default is 27, range is 0-2047
## 1FG dbl. tap is left click, 2FG dbl. tap is right click
#xsetwacom set "N-Trig MultiTouch touch" ZoomDistance "50"  # default is 50
#xsetwacom set "N-Trig MultiTouch touch" ScrollDistance "20"  # default is 20
#xsetwacom set "N-Trig MultiTouch touch" TapTime "250"  # 2FG R click, default is 250 ms
#xsetwacom set "N-Trig MultiTouch touch" Mode "Absolute"  # or is Relative needed for gestures?
#xsetwacom set "N-Trig MultiTouch touch" Button1 "1"  #  needed for 2FG touch?
#xsetwacom set "N-Trig MultiTouch touch" topy "0"
#xsetwacom set "N-Trig MultiTouch touch" topx "0"
#xsetwacom set "N-Trig MultiTouch touch" bottomy "7200"
#xsetwacom set "N-Trig MultiTouch touch" bottomx "9600"

## Developed with brettpim & markginter24 @ Ubuntu forums
Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox