'

Difference between revisions of "FAQ"

From linuxwacom
Jump to: navigation, search
(Add some basic FAQ)
 
(Copy more FAQs from old linuxwacom site.)
Line 6: Line 6:
  
 
See the [[HOWTO section]].
 
See the [[HOWTO section]].
 +
 +
== How do I get the special features of my stylus to work? ==
 +
 +
There are many different types of styli, mice, and pucks. All of them work to varying degrees, so if you are running into trouble, please send an email to the [[mailing lists]]. Also, if you are having trouble with the stable build of linuxwacom, try the beta. Many of the tools have been recently added and have not yet been moved to the production release.
 +
 +
Note, tilt is only supported with protocol V tablets, which include Intuos series and Cintiq 21UX/20WSX/12WX to date (July. 31, 2009). Any other tablets don't have tilt no matter you have the tilt option in your xorg.conf or not.
 +
 +
== Is hotplug supported for X input devices? ==
 +
Yes, but only for devices configured via HAL. If you have your devices configured in the xorg.conf, you can work around this by switching virtual terminals after replugging your tablet. That is, press Ctrl + Alt + F1 together then release them (screen turns to console); and press Ctrl + Alt + F7 together then release them (screen returns back to normal). On some distributions (e.g. Fedora), the original X session runs on VT1, hence substitute the commands with Ctrl + Alt + F2 and Ctrl + Alt + F1.
 +
 +
== Who is responsible for this code? ==
 +
You are. Linux Wacom is an open source project and driven by Linux users with Wacom tablets such as yourself. John Joganic took up the code in November of 2002 and created this project. The source code was written by at least two dozen individuals, most of them are not directly involved in the project any more. Ping Cheng has assumed the project administrator since 2003. You can help out by testing, reporting bugs, documentation on this wiki and of course by writing patches (see the [[mailing lists]]).

Revision as of 06:52, 6 January 2010

Contents

Which devices are supported?

Devices supported by the Linux Wacom Project are listed below. See the Device IDs page for additional detail.

Serial devices:

  • Intuos series*
  • Cintiq series*
  • TabletPC (with/without touch)

USB series:

  • Graphire series
  • Cintiq (V4 series)
  • CintiqPartner
  • Intuos 1, 2, 3, 4 & 5
  • Intuos and Intuos Pro
  • Cintiq (V5 series)
  • Volito series
  • PenPartner series
  • PL & DTF
  • Bamboo, Bamboo1, & BambooFun
  • Bamboo Pen & Touch
  • TabletPC (with/without touch)

Bluetooth series:

  • Graphire Bluetooth Wireless
  • Intuos4 Wireless


NOTE: Only ISDV4 serial devices (TabletPC's) are currently supported by xf86-input-wacom (Xserver 1.7 or later). For legacy serial graphics tablets a pair of serio kernel drivers are being developed, that in conjunction with inputattach, provide support on xf86-input-wacom. They are currently working or near completion. The protocol V tablet's (Intuos and Instuos2) wacom_serial5.ko is available here.

NOTE: A FreeBSD Wacom driver is available through the FreeBSD ports system. Please email your questions and/or suggestion directly to Bartosz Fabianowski, the Wacom FreeBSD developer.

How do I configure my device

See the HOWTO section.

How do I get the special features of my stylus to work?

There are many different types of styli, mice, and pucks. All of them work to varying degrees, so if you are running into trouble, please send an email to the mailing lists. Also, if you are having trouble with the stable build of linuxwacom, try the beta. Many of the tools have been recently added and have not yet been moved to the production release.

Note, tilt is only supported with protocol V tablets, which include Intuos series and Cintiq 21UX/20WSX/12WX to date (July. 31, 2009). Any other tablets don't have tilt no matter you have the tilt option in your xorg.conf or not.

Is hotplug supported for X input devices?

Yes, but only for devices configured via HAL. If you have your devices configured in the xorg.conf, you can work around this by switching virtual terminals after replugging your tablet. That is, press Ctrl + Alt + F1 together then release them (screen turns to console); and press Ctrl + Alt + F7 together then release them (screen returns back to normal). On some distributions (e.g. Fedora), the original X session runs on VT1, hence substitute the commands with Ctrl + Alt + F2 and Ctrl + Alt + F1.

Who is responsible for this code?

You are. Linux Wacom is an open source project and driven by Linux users with Wacom tablets such as yourself. John Joganic took up the code in November of 2002 and created this project. The source code was written by at least two dozen individuals, most of them are not directly involved in the project any more. Ping Cheng has assumed the project administrator since 2003. You can help out by testing, reporting bugs, documentation on this wiki and of course by writing patches (see the mailing lists).

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox